Sales Hotline +1 705-657-2749

NameNoco 6v & 12v 750ma switch-mode sla battery charger and maintainer g750
ModelG750
Our PriceC$44.99
Add To Cart
Quantity:
+
-
Noco 6v & 12v 750ma switch-mode sla battery charger and maintainer g750

The G750 is a smart, 5 Step, fully automatic switch-mode battery charger and maintainer. The G750 is best for small battery applications from 1.2-30Ah, such as charging your SLA Battery, Motorcycle, ATV, Jet Ski or Snowmobile. In addition to charging, the G750 can effectively maintain any 6V or 12V batteries in larger applications, such as Cars, RVs, Boats and Trucks.

G750 TECHNICAL SPECIFICATIONS

Input Voltage AC

110-120 VAC, 50-60Hz

Working Voltage AC

85-130 VAC, 50-60Hz

Input Current

300mA RMS Max

Efficiency

85% Approx.

Power

20W Max

Charging Voltage

7.2V/14.4V

Charging Current

750mA

Back Current Drain

<5mA

Ripple

<2%

Ambient Temperature

0°C to +40°C

Charger Type

5 Step, Fully Automatic,
Switch-Mode

Type of Batteries

6V & 12V Lead-Acid

Battery Chemistries

Wet, Gel, MF & AGM

Battery Capacity

1.2-30Ah, Maintains All Battery Sizes

Housing Protection

IP60

Cooling

Natural Convection

Noise Level

<50dB

Dimensions (L x W x H)

4.5 x 2.7 x 1.3 Inches

Weight

0.5 Pounds

 

WHAT'S IN THE BOX
  • G750 Charger
  • Battery Clamp Connectors
  • Eyelet Terminal Connectors
  • Quick Start Guide
CHARGING TIMES
The time required for the G750 to charge a normally discharged battery is shown below. Deeply discharged batteries may take longer to charge depending on the depth of discharge (DOD). The charge time is based on an average depth of discharge to a fully charged battery.

Note: The above table is for reference purposes only. Actual data may differ due to battery conditions. The time required for the G750 to charge a normally discharged battery is based on an average DOD of 50%.
Charging Steps
Step 1: Diagnostics
Checks the battery voltage to make sure battery connections are good and the battery is in a stable condition before beginning the charge process.

Step 2: Soft Start
Begins Bulk charging process with a gentle (soft) charge.

Step 3: Bulk
Continues Bulk charging process, returns 90% of battery capacity.

Step 4: Absorption
Brings the charge level to 100%. The battery charger will deliver small amounts of current to provide a safe, efficient charge and limit battery gassing.

Step 5: Maintenance
Monitors the battery voltage continuously to determine if a maintenance charge should be initiated. If the terminal voltage falls below approximately 6.4V (6V) and 12.8V (12V), the charger will start the Maintenance cycle until voltage reaches approximately 7.2V (6V) and 14.4V (12V) and then will discontinue the charge cycle. Maintenance cycle is repeated indefinitely to keep the battery at full charge, without overcharging. The battery charger can be left connected indefinitely.


 

 

 

*^*SLA Charging 12 Volts DC Nominal; 0.75 Amp DC 1 Year warranty to gaurantee against manufacturing defects 49.99 Battery Chemistries Wet, Gel, MF & AGM 6V and 12V chargers for up to 30ah batteries
Quantity:
+
-

Frequently Asked Questions

Ask us a question

Customers who bought this product also purchased

Related Products
We Accept
"Ordered yesterday @ 15:30, product delivered in today's mail-AWESOME. Ordered yesterday @ 15:30, product delivered in today's mail-AWESOME! Canadian company, helpful staff, reasonable prices, FAST delivery. I will certainly recommend BatteryBuyer to everyone needing batteries. Keep up the good work!!! Plus the new site is so much easier than the old site!!!"
Craig Roslin - BRAMPTON

Share This Product