Sales Hotline +1 705-657-2749

NameNoco 6v & 12v 1100ma switch-mode sla battery charger and maintainer g1100
Our PriceC$60.00
Add To Cart
Noco 6v & 12v 1100ma switch-mode sla battery charger and maintainer g1100

The G1100 is a smart, 7 Step, fully automatic switch-mode battery charger and maintainer. The G1100 is best for small battery applications from 2.2-40Ah, such as charging your SLA Battery ,Motorcycle, ATV, Jet Ski or Snowmobile. In addition to charging, the G1100 can effectively maintain any 6V or 12V batteries in larger applications, such as Cars, RVs, Boats and Trucks.


Input Voltage AC

110-120 VAC, 50-60Hz

Working Voltage AC

85-130 VAC, 50-60Hz

Input Current

600mA RMS Max


85% Approx.


30W Max

Charging Voltage

7.2/14.4, 7.4/14.7V (Cold/AGM)

Charging Current


Back Current Drain




Ambient Temperature

0°C to +40°C

Charger Type

7 Step, Fully Automatic,

Type of Batteries

6V & 12V Lead-Acid

Battery Chemistries

Wet, Gel, MF & AGM

Battery Capacity

Maintains All Battery Sizes

Housing Protection



Natural Convection

Noise Level


Dimensions (L x W x H)

6.1 x 2.5 x 1.6 Inches


0.8 Pounds

  • G750 Charger
  • Battery Clamp Connectors
  • Eyelet Terminal Connectors
  • Quick Start Guide

The time required for the G1100 to charge a normally discharged battery is shown below. Deeply discharged batteries may take longer to charge depending on the depth of discharge (DOD). The charge time is based on an average depth of discharge to a fully charged battery.


Note: The above table is for reference purposes only. Actual data may differ due to battery conditions. The time required for the G1100 to charge a normally discharged battery is based on an average DOD of 50%.
Charging Steps
Step 1: Diagnostics
Checks the battery voltage to make sure battery connections are good and the battery is in a stable condition before beginning the charge process.

Step 2: Recovery
Initializes the Recovery process, if needed, for deeply discharged or sulfated (desulfation) batteries by pulsing small amounts of current.

Step 3: Soft Start
Begins Bulk charging process with a gentle (soft) charge.

Step 4: Bulk
The Bulk charging process continues and returns 80% of the battery capacity. Indicated by the 25%, 50% and 75% CHARGE LEDs.

Step 5: Absorption
Brings the charge level to 90%. The battery charger will deliver small amounts of current to provide a safe, efficient charge and limit battery gassing.

Step 6: Trickle
Battery is fully charged and ready to use, indicated by the 100% CHARGE LED being a solid Green. In this step, the battery charger will only deliver enough current that the battery needs. If the battery tells the charger that more current is needed, the battery charger will switch to Maintenance.

Step 7: Maintenance
Continuously monitors the battery voltage to determine if a maintenance charge should be initiated. If the terminal voltage falls below 6.4V (6V) and 12.8V (12V), the charger will start the Maintenance cycle until voltage reaches 7.2V (6V) and 14.4V (12V) and then discontinues the charge cycle. The cycle between Trickle and Maintenance is repeated indefinitely to keep the battery at full charge, without overcharging. The battery charger can be left connected indefinitely




*^*SLA Charging 12 Volts DC Nominal; 1.1 Amp DC 1 Year warranty to gaurantee against manufacturing defects 49.99 Battery Chemistries Wet, Gel, MF & AGM 6V and 12V chargers for up to 40ah batteries

Frequently Asked Questions

Ask us a question

Customers who bought this product also purchased

Related Products
We Accept
"Ordered yesterday @ 15:30, product delivered in today's mail-AWESOME. Ordered yesterday @ 15:30, product delivered in today's mail-AWESOME! Canadian company, helpful staff, reasonable prices, FAST delivery. I will certainly recommend BatteryBuyer to everyone needing batteries. Keep up the good work!!! Plus the new site is so much easier than the old site!!!"
Craig Roslin - BRAMPTON

Share This Product